| Specification |
Performance |
| Operating Altitude |
Up to 500 meters nominal
Optional: Other altitude ranges offered on request |
| Horizontal accuracy including typical GPS errors (1 sigma) |
1/2000 x altitude (1 sigma), including typical Pos Navigation errors |
| Range
accuracy (1 sigma)Elevation accuracy (1 sigma) |
Lidar measurement <2cm RMS at 500m
Including typical GPS errors <4cm RMS at 500m |
| Range resolution |
0.5 cm |
| Range Capture |
Programmable unlimited number of returns including last
Option: full waveform capture
Option: Multiple pulse in the air |
| Intensity Capture |
12 bit dynamic range |
| Real time data acquisition and signal processing capacity |
A/D conversion rate - 1 Gigasample per second
Real time signal processing capacity - 70 Gigaflops per second |
| Spot distribution |
Palmer scanner, Ellipsoidal scanner pattern, degree of incident 14° to 20° |
| Scan frequency |
Programmable up to 50 rps = 100 scans per second |
| Scan angle |
± 20°
Option: other angles available on request |
| Position Orientation System |
iTraceRT-200-E |
| Pulse repetition frequency |
200 kHz at 500 m @ 20% reflectance
300 kHz at 200 m altitude |
| Data storage |
Ruggedized removable solid state disks 2 x 128 Gbytes |
| Beam divergence |
0,5 mrad |
| Laser classification |
Class IV (FDA CFR 21) |
| Power requirements 28 VDC |
< 15 A |
| Operating temperature |
Sensor: -10°C to +35°C |
| System weight |
Approx 25 kg |
| System size |
460 x 400 x 250 mm |
| Mount |
Adaptation plate for mount on the aircraft floor over standard photo hatches
Option: POD installation |
| Camera 1 |
1600x1200 pixel RGB or IR digital camera |
| Camera 2 |
16 MPix CCD RGB digital camera, including Carl Zeiss optics, controlled from DragonEye computers module
Option: Other cameras available on request |
